Bently Nevada 3500/93 System display

Description

The 3500/93 System Display is designed to meet the requirements of AmericanPetroleum Institute (API) Standard 670 and provide local or remote visualindication of all 3500 Machinery Protection System information residing in therack including: System Event List Alarm Event Lists All Channel, Monitor, Relay Module, Keyphasor* Module or TachometerModule dataThe 3500/93 System Display is configured using 3500 Rack ConfigurationSoftware. The display can be mounted in any of four ways:1. Face Mounting – display installs directly over the front panel of any fullsize 3500 rack using a special hinged support. This permits access to therack’s buffered output connectors and user-interface buttons andswitches without disconnecting or disabling the display.Note: For this mounting option only, the Display Interface Module (DIM)must be installed in slot 15 (right-most slot) of the rack. The FaceMounting option is not compatible with the 3500 Mini-rack.2. 19-inch EIA Rack Mounting – display is mounted on 19-inch EIA rails andlocated up to 100 feet away from the 3500 System. (Up to 4000 feetaway from the 3500 System when using the External Power Supply).3. Panel Mounting – display is mounted in a panel cutout located in thesame cabinet or up to 100 feet away from the 3500 System. (Up to 4000feet away from the 3500 System when using the External Power Supply).4. Independent Mounting – display is mounted flush against a wall orpanel and located up to 100 feet away from the 3500 System. (Up to4000 feet away from the 3500 System when using the External PowerSupply).

fznor